30 seconds of code 30秒就能理解的JavaScript优秀代码
本文来自github上的 30-seconds-of-code 项目,作者分享了大量有用的Javascript片段,你可以在30秒或更少时间中理解。本文为中文版翻译,下面一起来看看有哪些精彩的JavaScript代码值得收藏。 原文:https://github.com/Chalarangelo/30-seconds-of-code 作者:Chalarangelo 翻译:https://github.com/kujian/30-seconds-of-code 译者:蔡宝坚 本文翻译为前端开发博客所有,如有需要转载,请详细注明以上信息。
数组
arrayMax
返回数组中的最大值。 将
Math.max()
与扩展运算符 (
...
) 结合使用以获取数组中的最大值。
const arrayMax = arr => Math.max(...arr); // arrayMax([10, 1, 5]) -> 10
arrayMin
返回数组中的最小值。 将
Math.min()
与扩展运算符 (
...
) 结合使用以获取数组中的最小值。
const arrayMin = arr => Math.min(...arr); // arrayMin([10, 1, 5]) -> 1
chunk
将数组块划分为指定大小的较小数组。 使用
Array.from()
创建新的数组, 这符合将生成的区块数。使用
Array.slice()
将新数组的每个元素映射到
size
长度的区块。如果原始数组不能均匀拆分, 则最终的块将包含剩余的元素。
const chunk = (arr, size) => Array.from({length: Math.ceil(arr.length / size)}, (v, i) => arr.slice(i * size, i * size + size)); // chunk([1,2,3,4,5], 2) -> [[1,2],[3,4],[5]]
compact
从数组中移除 falsey 值。 使用
Array.filter()
筛选出 falsey 值 (
false
、
null
、
0
、
""
、
undefined
和
NaN
).
const compact = (arr) => arr.filter(Boolean); // compact([0, 1, false, 2, '', 3, 'a', 'e'*23, NaN, 's', 34]) -> [ 1, 2, 3, 'a', 's', 34 ]
countOccurrences
计算数组中值的出现次数。 使用
Array.reduce()
在每次遇到数组中的特定值时递增计数器。
const countOccurrences = (arr, value) => arr.reduce((a, v) => v === value ? a + 1 : a + 0, 0); // countOccurrences([1,1,2,1,2,3], 1) -> 3
deepFlatten
深拼合数组。 使用递归。使用
Array.concat()
与空数组 (
[]
) 和跨页运算符 (
...
) 来拼合数组。递归拼合作为数组的每个元素。
const deepFlatten = arr => [].concat(...arr.map(v => Array.isArray(v) ? deepFlatten(v) : v)); // deepFlatten([1,[2],[[3],4],5]) -> [1,2,3,4,5]
difference
返回两个数组之间的差异。 从
b
创建
Set
, 然后使用
Array.filter()
on 只保留
a
b
中不包含的值.
const difference = (a, b) => { const s = new Set(b); return a.filter(x => !s.has(x)); }; // difference([1,2,3], [1,2,4]) -> [3]
distinctValuesOfArray
返回数组的所有不同值。 使用 ES6
Set
和
...rest
运算符放弃所有重复的值。
const distinctValuesOfArray = arr => [...new Set(arr)]; // distinctValuesOfArray([1,2,2,3,4,4,5]) -> [1,2,3,4,5]
dropElements
移除数组中的元素, 直到传递的函数返回
true
。返回数组中的其余元素。 在数组中循环, 使用
Array.shift()
将数组的第一个元素除去, 直到函数的返回值为
true
。返回其余元素。
const dropElements = (arr, func) => { while (arr.length > 0 && !func(arr[0])) arr.shift(); return arr; }; // dropElements([1, 2, 3, 4], n => n >= 3) -> [3,4]
everyNth
返回数组中的每个第 n 个元素。 使用
Array.filter()
创建一个包含给定数组的每个第 n 个元素的新数组。
const everyNth = (arr, nth) => arr.filter((e, i) => i % nth === 0); // everyNth([1,2,3,4,5,6], 2) -> [ 1, 3, 5 ]
filterNonUnique
筛选出数组中的非唯一值。 对于只包含唯一值的数组, 请使用
Array.filter()
。
const filterNonUnique = arr => arr.filter(i => arr.indexOf(i) === arr.lastIndexOf(i)); // filterNonUnique([1,2,2,3,4,4,5]) -> [1,3,5]
flatten
拼合数组。 使用
Array.reduce()
获取数组中的所有元素和
concat()
以拼合它们。
const flatten = arr => arr.reduce((a, v) => a.concat(v), []); // flatten([1,[2],3,4]) -> [1,2,3,4]
flattenDepth
将数组向上拼合到指定深度。 使用递归, 递减
depth
, 每层深度为1。使用
Array.reduce()
和
Array.concat()
来合并元素或数组。基本情况下, 对于等于
1
的
depth
停止递归。省略第二个元素,
depth
仅拼合到
1
的深度 (单个拼合)。
const flattenDepth = (arr, depth = 1) => depth != 1 ? arr.reduce((a, v) => a.concat(Array.isArray(v) ? flattenDepth(v, depth - 1) : v), []) : arr.reduce((a, v) => a.concat(v), []); // flattenDepth([1,[2],[[[3],4],5]], 2) -> [1,2,[3],4,5]
groupby
根据给定函数对数组元素进行分组。 使用
Array.map()
将数组的值映射到函数或属性名。使用
Array.reduce()
创建一个对象, 其中的键是从映射的结果生成的。
const groupBy = (arr, func) => arr.map(typeof func === 'function' ? func : val => val[func]) .reduce((acc, val, i) => { acc[val] = (acc[val] || []).concat(arr[i]); return acc; }, {}); // groupBy([6.1, 4.2, 6.3], Math.floor) -> {4: [4.2], 6: [6.1, 6.3]} // groupBy(['one', 'two', 'three'], 'length') -> {3: ['one', 'two'], 5: ['three']}
head
返回列表的头。 使用
arr[0]
可返回传递的数组的第一个元素。
const head = arr => arr[0]; // head([1,2,3]) -> 1
initial
返回除最后一个数组之外的所有元素。 使用 ”
arr.slice(0,-1)
” 返回数组的最后一个元素。
const initial = arr => arr.slice(0, -1); // initial([1,2,3]) -> [1,2]
initializeArrayWithRange
初始化包含指定范围内的数字的数组。 使用
Array(end-start)
创建所需长度的数组
Array.map()
以填充区域中所需的值。可以省略
start
以使用默认值
0
.
const initializeArrayWithRange = (end, start = 0) => Array.from({ length: end - start }).map((v, i) => i + start); // initializeArrayWithRange(5) -> [0,1,2,3,4]
initializeArrayWithValues
初始化并填充具有指定值的数组。 使用
Array(n)
创建所需长度的数组,
fill(v)
以填充所需的值。可以省略
value
以使用默认值
0
.
const initializeArrayWithValues = (n, value = 0) => Array(n).fill(value); // initializeArrayWithValues(5, 2) -> [2,2,2,2,2]
intersection
返回两个数组中存在的元素的列表。 从
b
创建
Set
, 然后使用
Array.filter()
on
a
只保留
b
中包含的值.
const intersection = (a, b) => { const s = new Set(b); return a.filter(x => s.has(x)); }; // intersection([1,2,3], [4,3,2]) -> [2,3]
last
返回数组中的最后一个元素。 使用
arr.length - 1
可计算给定数组的最后一个元素的索引并返回它。
const last = arr => arr[arr.length - 1]; // last([1,2,3]) -> 3
mapObject
使用函数将数组的值映射到对象, 其中键值对由原始值作为键和映射值组成。 使用匿名内部函数范围来声明未定义的内存空间, 使用闭包来存储返回值。使用新的
Array
可将该数组与函数的映射放在其数据集上, 而逗号运算符返回第二个步骤, 而不需要从一个上下文移动到另一个环境 (由于关闭和操作顺序)。
const mapObject = (arr, fn) => (a => (a = [arr, arr.map(fn)], a[0].reduce( (acc,val,ind) => (acc[val] = a[1][ind], acc), {}) )) ( ); /* const squareIt = arr => mapObject(arr, a => a*a) squareIt([1,2,3]) // { 1: 1, 2: 4, 3: 9 } */
nthElement
返回数组的第 n 个元素。 使用
Array.slice()
可获取包含第 n 个元素的数组。如果索引超出界限, 则返回
[]
。省略第二个参数
n
, 以获取数组的第一个元素。
const nthElement = (arr, n=0) => (n>0? arr.slice(n,n+1) : arr.slice(n))[0]; // nthElement(['a','b','c'],1) -> 'b' // nthElement(['a','b','b'],-3) -> 'a'
pick
从对象中选取对应于给定键的键值对。 使用
Array.reduce()
将筛选/选取的密钥转换回具有相应键值对的对象 (如果在 obj 中存在该键)。
const pick = (obj, arr) => arr.reduce((acc, curr) => (curr in obj && (acc[curr] = obj[curr]), acc), {}); // pick({ 'a': 1, 'b': '2', 'c': 3 }, ['a', 'c']) -> { 'a': 1, 'c': 3 }
pull
对原始数组进行变异, 以筛选出指定的值。 使用
Array.filter()
和
Array.includes()
来拉出不需要的值。使用
Array.length = 0
可将传入的数组中的长度重置为零, 并将其设置为
Array.push()
, 以便仅使用所提取的值填充它。
const pull = (arr, ...args) => { let pulled = arr.filter((v, i) => !args.includes(v)); arr.length = 0; pulled.forEach(v => arr.push(v)); }; // let myArray = ['a', 'b', 'c', 'a', 'b', 'c']; // pull(myArray, 'a', 'c'); // console.log(myArray) -> [ 'b', 'b' ]
remove
从数组中移除给定函数返回
false
的元素. 使用
Array.filter()
查找返回 truthy 值的数组元素和
Array.reduce()
以使用
Array.splice()
删除元素。使用三参数 (
func
value, index, array
调用函数).
const remove = (arr, func) => Array.isArray(arr) ? arr.filter(func).reduce((acc, val) => { arr.splice(arr.indexOf(val), 1); return acc.concat(val); }, []) : []; // remove([1, 2, 3, 4], n => n % 2 == 0) -> [2, 4]
sample
返回数组中的随机元素。 使用
Math.random()
生成一个随机数, 将它与
length
相乘, 并使用数学将其舍入到最接近的整数
Math.floor()
。此方法也适用于字符串。
const sample = arr => arr[Math.floor(Math.random() * arr.length)]; // sample([3, 7, 9, 11]) -> 9
shuffle
随机数组值的顺序。 使用
Array.sort()
可在比较器中使用
Math.random()
重新排序元素。
const shuffle = arr => arr.sort(() => Math.random() - 0.5); // shuffle([1,2,3]) -> [2,3,1]
similarity
返回两个数组中都显示的元素的数组。 使用
filter()
可删除不属于
values
的值, 使用
includes()
确定.
const similarity = (arr, values) => arr.filter(v => values.includes(v)); // similarity([1,2,3], [1,2,4]) -> [1,2]
symmetricDifference
返回两个数组之间的对称差。 从每个数组创建一个
Set
, 然后对它们中的每一个都使用
Array.filter()
, 以便只保留其他值中不包含的数值。
const symmetricDifference = (a, b) => { const sA = new Set(a), sB = new Set(b); return [...a.filter(x => !sB.has(x)), ...b.filter(x => !sA.has(x))]; } // symmetricDifference([1,2,3], [1,2,4]) -> [3,4]
tail
返回数组中的所有元素, 除第一个。 如果数组的
length
大于
1
, 则返回
arr.slice(1)
, 否则返回整个数组。
const tail = arr => arr.length > 1 ? arr.slice(1) : arr; // tail([1,2,3]) -> [2,3] // tail([1]) -> [1]
take
返回一个数组, 其中 n 个元素从开始处移除。 使用
Array.slice()
创建数组的切片, 其中包含从开始处取出的
n
元素。
const take = (arr, n = 1) => arr.slice(0, n); // take([1, 2, 3], 5) -> [1, 2, 3] // take([1, 2, 3], 0) -> []
takeRight
返回一个数组, 其中 n 个元素从末尾移除。 使用
Array.slice()
创建数组的切片, 其中包含从末尾取出的
n
元素。
const takeRight = (arr, n = 1) => arr.slice(arr.length - n, arr.length); // takeRight([1, 2, 3], 2) -> [ 2, 3 ] // takeRight([1, 2, 3]) -> [3]
union
返回在两个数组中的任意一个中存在的每个元素。 创建一个
Set
, 其中包含
a
和
b
的所有值, 并将其转换为数组。
const union = (a, b) => Array.from(new Set([...a, ...b])); // union([1,2,3], [4,3,2]) -> [1,2,3,4]
without
筛选出数组中具有指定值之一的元素。 使用
Array.filter()
创建不包括的数组 (使用
!Array.includes()
) 所有给定值。
const without = (arr, ...args) => arr.filter(v => !args.includes(v)); // without([2, 1, 2, 3], 1, 2) -> [3]
zip
创建基于原始数组中的位置分组的元素数组。 使用
Math.max.apply()
获取参数中最长的数组。创建一个以该长度为返回值的数组, 并使用 map 函数创建一个分组元素的数组
Array.from()
如果参数数组的长度不同, 则在未找到任何值的情况下使用
undefined
。
const zip = (...arrays) => { const maxLength = Math.max(...arrays.map(x => x.length)); return Array.from({length: maxLength}).map((_, i) => { return Array.from({length: arrays.length}, (_, k) => arrays[k][i]); }) } //zip(['a', 'b'], [1, 2], [true, false]); -> [['a', 1, true], ['b', 2, false]] //zip(['a'], [1, 2], [true, false]); -> [['a', 1, true], [undefined, 2, false]]
浏览器
bottomVisible
如果页的底部可见, 则返回
true
, 否则为
false
。 使用
scrollY
、
scrollHeight
和
clientHeight
来确定页面底部是否可见。
const bottomVisible = () => document.documentElement.clientHeight + window.scrollY >= document.documentElement.scrollHeight || document.documentElement.clientHeight; // bottomVisible() -> true
currentURL
返回当前 URL。 使用
window.location.href
获取当前 URL。
const currentURL = () => window.location.href; // currentUrl() -> 'https://google.com'
elementIsVisibleInViewport
如果指定的元素在视区中可见, 则返回
true
, 否则为
false
。 使用
Element.getBoundingClientRect()
和
window.inner(Width|Height)
值以确定给定元素在视区中是否可见。省略第二个参数以确定该元素是否完全可见, 或指定
true
以确定它是否部分可见。
const elementIsVisibleInViewport = (el, partiallyVisible = false) => { const { top, left, bottom, right } = el.getBoundingClientRect(); return partiallyVisible ? ((top > 0 && top < innerHeight) || (bottom > 0 && bottom < innerHeight)) && ((left > 0 && left < innerWidth) || (right > 0 && right < innerWidth)) : top >= 0 && left >= 0 && bottom <= innerHeight && right <= innerWidth; }; // e.g. 100x100 viewport and a 10x10px element at position {top: -1, left: 0, bottom: 9, right: 10} // elementIsVisibleInViewport(el) -> false (not fully visible) // elementIsVisibleInViewport(el, true) -> true (partially visible)
getScrollPosition
返回当前页的滚动位置。 如果已定义, 则使用
pageXOffset
和
pageYOffset
, 否则
scrollLeft
和
scrollTop
。可以省略
el
以使用
window
的默认值.
const getScrollPosition = (el = window) => ({x: (el.pageXOffset !== undefined) ? el.pageXOffset : el.scrollLeft, y: (el.pageYOffset !== undefined) ? el.pageYOffset : el.scrollTop}); // getScrollPosition() -> {x: 0, y: 200}
getURLParameters
返回一个包含当前 URL 参数的对象。 使用
match()
与适当的正则表达式来获取所有键值对,
Array.reduce()
可将它们映射并合并到单个对象中。将
location.search
作为要应用于当前
url
的参数传递.
const getURLParameters = url => url.match(/([^?=&]+)(=([^&]*))/g).reduce( (a, v) => (a[v.slice(0, v.indexOf('='))] = v.slice(v.indexOf('=') + 1), a), {} ); // getURLParameters('http://url.com/page?name=Adam&surname=Smith') -> {name: 'Adam', surname: 'Smith'}
redirect
重定向到指定的 URL。 使用
window.location.href
或
window.location.replace()
重定向到
url
。传递第二个参数以模拟链接单击 (
true
-默认值) 或 HTTP 重定向 (
false
).
const redirect = (url, asLink = true) => asLink ? window.location.href = url : window.location.replace(url); // redirect('https://google.com')
scrollToTop
平滑滚动到页面顶部。 使用
document.documentElement.scrollTop
或
document.body.scrollTop
从顶部获取距离。从顶部的距离的一小部分滚动。使用
window.requestAnimationFrame()
对滚动进行动画处理。
const scrollToTop = () => { const c = document.documentElement.scrollTop || document.body.scrollTop; if (c > 0) { window.requestAnimationFrame(scrollToTop); window.scrollTo(0, c - c / 8); } }; // scrollToTop()
日期
getDaysDiffBetweenDates
返回两个日期之间的差异 (以天为值)。 计算
Date
对象之间的差异 (以天为)。
const getDaysDiffBetweenDates = (dateInitial, dateFinal) => (dateFinal - dateInitial) / (1000 * 3600 * 24); // getDaysDiffBetweenDates(new Date("2017-12-13"), new Date("2017-12-22")) -> 9
JSONToDate
将 JSON 对象转换为日期。 使用
Date()
, 将 JSON 格式的日期转换为可读格式 (
dd/mm/yyyy
日)).
const JSONToDate = arr => { const dt = new Date(parseInt(arr.toString().substr(6))); return `${ dt.getDate() }/${ dt.getMonth() + 1 }/${ dt.getFullYear() }` }; // JSONToDate(/Date(1489525200000)/) -> "14/3/2017"
toEnglishDate
将日期从美国格式转换为英文格式。 使用
Date.toISOString()
、
split('T')
和
replace()
将日期从美式格式转换为英文格式。如果传递的时间不能转换为日期, 则抛出错误。
const toEnglishDate = (time) => {try{return new Date(time).toISOString().split('T')[0].replace(/-/g, '/')}catch(e){return}}; // toEnglishDate('09/21/2010') -> '21/09/2010'
功能
chainAsync
链异步函数。 循环遍历包含异步事件的函数数组, 当每个异步事件完成时调用
next
。
const chainAsync = fns => { let curr = 0; const next = () => fns[curr++](next); next(); }; /* chainAsync([ next => { console.log('0 seconds'); setTimeout(next, 1000); }, next => { console.log('1 second'); setTimeout(next, 1000); }, next => { console.log('2 seconds'); } ]) */
compose
执行从右向左的函数组合。 使用
Array.reduce()
执行从右向左的函数组合。最后一个 (最右边) 的函数可以接受一个或多个参数;其余的函数必须是一元的。
const compose = (...fns) => fns.reduce((f, g) => (...args) => f(g(...args))); /* const add5 = x => x + 5 const multiply = (x, y) => x * y const multiplyAndAdd5 = compose(add5, multiply) multiplyAndAdd5(5, 2) -> 15 */
curry
Curries a function. 使用递归。如果提供的参数 (变量) 的数量足够, 请调用传递的函数
args
f
。否则, 返回需要其余参数的扩充函数
f
。如果你想咖喱一个函数, 接受可变数目的参数 (如
Math.min()
), 可以选择将参数的个数传递到第二个参数
arity
(可变函数).
const curry = (fn, arity = fn.length, ...args) => arity <= args.length ? fn(...args) : curry.bind(null, fn, arity, ...args); // curry(Math.pow)(2)(10) -> 1024 // curry(Math.min, 3)(10)(50)(2) -> 2
functionName
记录函数的名称。 使用
console.debug()
和传递的方法的
name
属性将方法的名称记录到控制台的
debug
通道中。
const functionName = fn => (console.debug(fn.name), fn); // functionName(Math.max) -> max (logged in debug channel of console)
pipe
执行从左向右的函数组合。 使用
Array.reduce()
与扩展运算符 (
...
) 执行从左向右的函数组合。第一个 (最左边的) 函数可以接受一个或多个参数;其余的函数必须是一元的。
const pipeFunctions = (...fns) => fns.reduce((f, g) => (...args) => g(f(...args))); /* const add5 = x => x + 5 const multiply = (x, y) => x * y const multiplyAndAdd5 = pipeFunctions(multiply, add5) multiplyAndAdd5(5, 2) -> 15 */
promisify
转换异步函数以返回一个承诺。 使用讨好返回一个返回调用原始函数的
Promise
的函数。使用
...rest
运算符传入所有参数。
在节点 8 + 中, 可以使用 util.promisify
const promisify = func => (...args) => new Promise((resolve, reject) => func(...args, (err, result) => err ? reject(err) : resolve(result)) ); // const delay = promisify((d, cb) => setTimeout(cb, d)) // delay(2000).then(() => console.log('Hi!')) -> Promise resolves after 2s
runPromisesInSeries
运行一系列的承诺系列。 使用
Array.reduce()
创建一个承诺链, 每个承诺在解决时返回下一个承诺。
const runPromisesInSeries = ps => ps.reduce((p, next) => p.then(next), Promise.resolve()); // const delay = (d) => new Promise(r => setTimeout(r, d)) // runPromisesInSeries([() => delay(1000), () => delay(2000)]) -> executes each promise sequentially, taking a total of 3 seconds to complete
sleep
延迟异步函数的执行。 延迟执行
async
函数的一部分, 将其放入休眠状态, 返回
Promise
.
const sleep = ms => new Promise(resolve => setTimeout(resolve, ms)); /* async function sleepyWork() { console.log('I'm going to sleep for 1 second.'); await sleep(1000); console.log('I woke up after 1 second.'); } */
数学
arrayAverage
返回数字数组的平均值。 使用
Array.reduce()
将每个值添加到累加器中, 并以
0
的值初始化, 除以数组的
length
。
const arrayAverage = arr => arr.reduce((acc, val) => acc + val, 0) / arr.length; // arrayAverage([1,2,3]) -> 2
arraySum
返回一个数字数组的总和。 使用
Array.reduce()
将每个值添加到累加器中, 并以
0
值初始化.
const arraySum = arr => arr.reduce((acc, val) => acc + val, 0); // arraySum([1,2,3,4]) -> 10
collatz
应用 Collatz 算法。 如果
n
是偶数, 则返回
n/2
。否则返回
3n+1
.
const collatz = n => (n % 2 == 0) ? (n / 2) : (3 * n + 1); // collatz(8) --> 4 // collatz(5) --> 16
collatz
将数字转换为数字数组。 将数字转换为字符串, 在 ES6 (
[...string]
) 中使用扩展运算符生成数组。使用
Array.map()
和
parseInt()
将每个值转换为整数。
const digitize = n => [...''+n].map(i => parseInt(i)); // digitize(2334) -> [2, 3, 3, 4]
digitize
返回两点之间的距离。 使用
Math.hypot()
计算两个点之间的欧氏距离。
const distance = (x0, y0, x1, y1) => Math.hypot(x1 - x0, y1 - y0); // distance(1,1, 2,3) -> 2.23606797749979
distance
计算数字的阶乘。 使用递归。如果
n
小于或等于
1
, 则返回
1
。否则, 返回
n
的乘积和
n - 1
的阶乘。如果
n
为负数, 则引发异常。
const factorial = n => n < 0 ? (() => { throw new TypeError('Negative numbers are not allowed!') })() : n <= 1 ? 1 : n * factorial(n - 1); // factorial(6) -> 720
fibonacci
生成一个数组, 包含斐波那契数列, 直到第 n 个项。 创建一个指定长度的空数组, 初始化前两个值 (
0
和
1
)。使用
Array.reduce()
可将值添加到数组中, 方法是使用前两个值的总和, 但前两个数值除外。
const fibonacci = n => Array(n).fill(0).reduce((acc, val, i) => acc.concat(i > 1 ? acc[i - 1] + acc[i - 2] : i), []); // fibonacci(5) -> [0,1,1,2,3]
gcd
计算两个数字之间最大的公共除数。 使用递归。基本情况是当
y
等于
0
时。在这种情况下, 返回
x
。否则, 返回
y
的 GCD 和除法的其余部分
x/y
.
const gcd = (x, y) => !y ? x : gcd(y, x % y); // gcd (8, 36) -> 4
hammingDistance
计算两个值之间的汉明距离。 使用 XOR 运算符 (
^
) 可查找两个数字之间的位差, 使用
toString(2)
转换为二进制字符串。使用
match(/1/g)
计算并返回字符串中
1
的数目。.
const hammingDistance = (num1, num2) => ((num1 ^ num2).toString(2).match(/1/g) || '').length; // hammingDistance(2,3) -> 1
isDivisible
检查第一个数值参数是否可被另一个数字变量整除。 使用模数运算符 (
%
) 检查余数是否等于
0
.
const isDivisible = (dividend, divisor) => dividend % divisor === 0; // isDivisible(6,3) -> true
iseven
如果给定的数字为偶数, 则返回
true
, 否则为
false
。 检查一个数字是奇数还是使用模数 (
%
) 运算符。如果数字为偶数, 则返回
true
, 如果数字为奇数, 则为
false
。
const isEven = num => num % 2 === 0; // isEven(3) -> false
lcm
返回两个数字中最不常见的倍数。 使用最大的公共除数 (GCD) 公式和
Math.abs()
来确定最不常见的倍数。GCD 公式使用递归。
const lcm = (x,y) => { const gcd = (x, y) => !y ? x : gcd(y, x % y); return Math.abs(x*y)/(gcd(x,y)); }; // lcm(12,7) -> 84
median
返回数字数组的中间值。 找到数组的中间, 使用
Array.sort()
来对值进行排序。如果
length
为奇数, 则返回中点的数字, 否则为两个中间数的平均值。
const median = arr => { const mid = Math.floor(arr.length / 2), nums = arr.sort((a, b) => a - b); return arr.length % 2 !== 0 ? nums[mid] : (nums[mid - 1] + nums[mid]) / 2; }; // median([5,6,50,1,-5]) -> 5 // median([0,10,-2,7]) -> 3.5
palindrome
如果给定字符串为回文, 则返回
true
, 否则为
false
。 转换字符串
toLowerCase()
并使用
replace()
从其中删除非字母数字字符。然后,
split('')
到各个字符,
reverse()
,
join('')
, 并将其与原始的、不可逆转的字符串进行比较, 然后将其转换为
tolowerCase()
.
const palindrome = str => { const s = str.toLowerCase().replace(/[W_]/g,''); return s === s.split('').reverse().join(''); } // palindrome('taco cat') -> true
percentile
使用百分比公式计算给定数组中有多少个数小于或等于给定值。 使用
Array.reduce()
计算值的下面有多少, 有多少个数是相同的值, 并应用百分比公式。
const percentile = (arr, val) => 100 * arr.reduce((acc,v) => acc + (v < val ? 1 : 0) + (v === val ? 0.5 : 0), 0) / arr.length; // percentile([1,2,3,4,5,6,7,8,9,10], 6) -> 55
powerset
返回给定数字数组的 powerset。 使用
Array.reduce()
与
Array.map()
组合, 以循环访问元素并将其合并到包含所有组合的数组中。
const powerset = arr => arr.reduce((a, v) => a.concat(a.map(r => [v].concat(r))), [[]]); // powerset([1,2]) -> [[], [1], [2], [2,1]]
randomIntegerInRange
返回指定范围内的随机整数。 使用
Math.random()
生成一个随机数并将其映射到所需的范围, 使用
Math.floor()
使其成为整数。
const randomIntegerInRange = (min, max) => Math.floor(Math.random() * (max - min + 1)) + min; // randomIntegerInRange(0, 5) -> 2
randomNumberInRange
返回指定范围内的随机数。 使用
Math.random()
生成随机值, 并使用乘法将其映射到所需的范围。
const randomNumberInRange = (min, max) => Math.random() * (max - min) + min; // randomNumberInRange(2,10) -> 6.0211363285087005
round
将数字四舍五入到指定的位数。 使用
Math.round()
和模板文本将数字舍入到指定的位数。省略第二个参数,
decimals
舍入为整数。
const round = (n, decimals=0) => Number(`${Math.round(`${n}e${decimals}`)}e-${decimals}`); // round(1.005, 2) -> 1.01
standardDeviation
返回数字数组的标准偏差。 使用
Array.reduce()
计算值的平均值、方差和方差的总和, 值的方差, 然后确定标准偏差。可以省略第二个参数以获取样本标准偏差, 或将其设置为
true
以获取总体标准偏差。
const standardDeviation = (arr, usePopulation = false) => { const mean = arr.reduce((acc, val) => acc + val, 0) / arr.length; return Math.sqrt( arr.reduce((acc, val) => acc.concat(Math.pow(val - mean, 2)), []) .reduce((acc, val) => acc + val, 0) / (arr.length - (usePopulation ? 0 : 1)) ); }; // standardDeviation([10,2,38,23,38,23,21]) -> 13.284434142114991 (sample) // standardDeviation([10,2,38,23,38,23,21], true) -> 12.29899614287479 (population)
媒体
speechSynthesis
执行语音合成 (实验)。 使用
SpeechSynthesisUtterance.voice
和
window.speechSynthesis.getVoices()
将邮件转换为语音。使用
window.speechSynthesis.speak()
播放该消息。 了解有关Web 语音 API 的 SpeechSynthesisUtterance 接口的详细信息.
const speechSynthesis = message => { const msg = new SpeechSynthesisUtterance(message); msg.voice = window.speechSynthesis.getVoices()[0]; window.speechSynthesis.speak(msg); }; // speechSynthesis('Hello, World') -> plays the message
节点
JSONToFile
将 JSON 对象写入文件。 使用
fs.writeFile()
、模板文本和
JSON.stringify()
将
json
对象写入
.json
文件。
const fs = require('fs'); const JSONToFile = (obj, filename) => fs.writeFile(`${filename}.json`, JSON.stringify(obj, null, 2)) // JSONToFile({test: "is passed"}, 'testJsonFile') -> writes the object to 'testJsonFile.json'
readFileLines
返回指定文件中的行的数组。 在
fs
节点包中使用
readFileSync
函数可以从文件创建
Buffer
。使用
toString(encoding)
函数将缓冲区转换为字符串。通过
split
ing 文件内容行从文件内容创建数组 (每个
n
).
const fs = require('fs'); const readFileLines = filename => fs.readFileSync(filename).toString('UTF8').split('n'); /* contents of test.txt : line1 line2 line3 ___________________________ let arr = readFileLines('test.txt') console.log(arr) // -> ['line1', 'line2', 'line3'] */
对象
cleanObj
移除从 JSON 对象指定的属性之外的任何特性。 使用
Object.keys()
方法可以遍历给定的 json 对象并删除在给定数组中不是
include
d 的键。另外, 如果给它一个特殊的键 (
childIndicator
), 它将在里面深入搜索, 并将函数应用于内部对象。
const cleanObj = (obj, keysToKeep = [], childIndicator) => { Object.keys(obj).forEach(key => { if (key === childIndicator) { cleanObj(obj[key], keysToKeep, childIndicator); } else if (!keysToKeep.includes(key)) { delete obj[key]; } }) } /* const testObj = {a: 1, b: 2, children: {a: 1, b: 2}} cleanObj(testObj, ["a"],"children") console.log(testObj)// { a: 1, children : { a: 1}} */
objectFromPairs
从给定的键值对创建对象。 使用
Array.reduce()
创建和组合键值对。
const objectFromPairs = arr => arr.reduce((a, v) => (a[v[0]] = v[1], a), {}); // objectFromPairs([['a',1],['b',2]]) -> {a: 1, b: 2}
objectToPairs
从对象创建键值对数组的数组。 使用
Object.keys()
和
Array.map()
循环访问对象的键并生成具有键值对的数组。
const objectToPairs = obj => Object.keys(obj).map(k => [k, obj[k]]); // objectToPairs({a: 1, b: 2}) -> [['a',1],['b',2]])
shallowClone
创建对象的浅表克隆。 使用
Object.assign()
和一个空对象 (
{}
) 创建原始的浅克隆。
const shallowClone = obj => Object.assign({}, obj); /* const a = { x: true, y: 1 }; const b = shallowClone(a); a === b -> false */
truthCheckCollection
检查谓词 (第二个参数) 是否 truthy 集合的所有元素 (第一个参数)。 使用
Array.every()
检查每个传递的对象是否具有指定的属性, 以及是否返回 truthy 值。
truthCheckCollection = (collection, pre) => (collection.every(obj => obj[pre])); // truthCheckCollection([{"user": "Tinky-Winky", "sex": "male"}, {"user": "Dipsy", "sex": "male"}], "sex") -> true
字符串
anagrams
生成字符串的所有字谜 (包含重复项)。 使用递归。对于给定字符串中的每个字母, 为其其余字母创建所有部分字谜。使用
Array.map()
将字母与每个部分变位词组合在一起, 然后将
Array.reduce()
组合在一个数组中的所有字谜。基本情况为字符串
length
等于
2
或
1
.
const anagrams = str => { if (str.length <= 2) return str.length === 2 ? [str, str[1] + str[0]] : [str]; return str.split('').reduce((acc, letter, i) => acc.concat(anagrams(str.slice(0, i) + str.slice(i + 1)).map(val => letter + val)), []); }; // anagrams('abc') -> ['abc','acb','bac','bca','cab','cba']
Capitalize
将字符串的第一个字母大写。 使用 destructuring 和
toUpperCase()
可将第一个字母、
...rest
用于获取第一个字母之后的字符数组, 然后是
Array.join('')
以使其成为字符串。省略
lowerRest
参数以保持字符串的其余部分不变, 或将其设置为
true
以转换为小写。
const capitalize = ([first,...rest], lowerRest = false) => first.toUpperCase() + (lowerRest ? rest.join('').toLowerCase() : rest.join('')); // capitalize('myName') -> 'MyName' // capitalize('myName', true) -> 'Myname'
capitalizeEveryWord
将字符串中每个单词的首字母大写。 使用
replace()
匹配每个单词和
toUpperCase()
的第一个字符以将其大写。
const capitalizeEveryWord = str => str.replace(/b[a-z]/g, char => char.toUpperCase()); // capitalizeEveryWord('hello world!') -> 'Hello World!'
escapeRegExp
转义要在正则表达式中使用的字符串。 使用
replace()
可转义特殊字符。
const escapeRegExp = str => str.replace(/[.*+?^${}()|[]\]/g, '\$&'); // escapeRegExp('(test)') -> \(test\)
fromCamelCase
从匹配转换字符串。 使用
replace()
可删除下划线、连字符和空格, 并将单词转换为匹配。省略第二个参数以使用默认分隔符
_
.
const fromCamelCase = (str, separator = '_') => str.replace(/([a-zd])([A-Z])/g, '$1' + separator + '$2') .replace(/([A-Z]+)([A-Z][a-zd]+)/g, '$1' + separator + '$2').toLowerCase(); // fromCamelCase('someDatabaseFieldName', ' ') -> 'some database field name' // fromCamelCase('someLabelThatNeedsToBeCamelized', '-') -> 'some-label-that-needs-to-be-camelized' // fromCamelCase('someJavascriptProperty', '_') -> 'some_javascript_property'
reverseString
反转字符串。 使用数组 destructuring 和
Array.reverse()
可反转字符串中字符的顺序。使用
join('')
组合字符以获取字符串.
const reverseString = str => [...str].reverse().join(''); // reverseString('foobar') -> 'raboof'
sortCharactersInString
按字母顺序对字符串中的字符进行排序。 使用
split('')
、
Array.sort()
利用
localeCompare()
重新组合使用
join('')
.
const sortCharactersInString = str => str.split('').sort((a, b) => a.localeCompare(b)).join(''); // sortCharactersInString('cabbage') -> 'aabbceg'
toCamelCase
将字符串转换为匹配。 使用
replace()
可删除下划线、连字符和空格, 并将单词转换为匹配。
const toCamelCase = str => str.replace(/^([A-Z])|[s-_]+(w)/g, (match, p1, p2, offset) => p2 ? p2.toUpperCase() : p1.toLowerCase()); // toCamelCase("some_database_field_name") -> 'someDatabaseFieldName' // toCamelCase("Some label that needs to be camelized") -> 'someLabelThatNeedsToBeCamelized' // toCamelCase("some-javascript-property") -> 'someJavascriptProperty' // toCamelCase("some-mixed_string with spaces_underscores-and-hyphens") -> 'someMixedStringWithSpacesUnderscoresAndHyphens'
truncateString
将字符串截断为指定长度。 确定字符串的
length
是否大于
num
。将截断的字符串返回到所需的长度, 并将
...
追加到末尾或原始字符串。
const truncateString = (str, num) => str.length > num ? str.slice(0, num > 3 ? num - 3 : num) + '...' : str; // truncateString('boomerang', 7) -> 'boom...'
实用
coalesce
返回第一个非空/未定义参数。 使用
Array.find()
返回第一个非
null
/
undefined
的参数。
const coalesce = (...args) => args.find(_ => ![undefined, null].includes(_)) // coalesce(null,undefined,"",NaN, "Waldo") -> ""
coalesceFactory
返回自定义的联合函数, 返回从提供的参数验证函数返回
true
的第一个参数。 使用
Array.find()
返回从提供的参数验证函数返回
true
的第一个参数。
const coalesceFactory = valid => (...args) => args.find(valid); // const customCoalesce = coalesceFactory(_ => ![null, undefined, "", NaN].includes(_)) // customCoalesce(undefined, null, NaN, "", "Waldo") //-> "Waldo"
extendHex
将3位色码扩展为6位色码。 使用
Array.map()
、
split()
和
Array.join()
来加入映射数组, 将3位的 RGB notated 十六进制 color-code 转换为6位数字形式。
Array.slice()
用于从字符串启动中删除
#
, 因为它添加了一次。
const extendHex = shortHex => '#' + shortHex.slice(shortHex.startsWith('#') ? 1 : 0).split('').map(x => x+x).join('') // extendHex('#03f') -> '#0033ff' // extendHex('05a') -> '#0055aa'
gettype
返回值的本机类型。 如果值未定义或为 null, 则返回小写的构造函数名称、”未定义” 或 “null”
const getType = v => v === undefined ? 'undefined' : v === null ? 'null' : v.constructor.name.toLowerCase(); // getType(new Set([1,2,3])) -> "set"
hexToRGB
将 colorcode 转换为
rgb()
字符串。 使用按位右运算符和掩码位与
&
(and) 运算符将十六进制颜色代码 (前缀为
#
) 转换为具有 RGB 值的字符串。如果它是一个3位数的 colorcode, 那么用 extendHex () 函数 (ref.
extendHex
代码段) 扩展的6位 colorcode 进行相同的处理
const hexToRgb = hex => { const extendHex = shortHex => '#' + shortHex.slice(shortHex.startsWith('#') ? 1 : 0).split('').map(x => x+x).join(''); const extendedHex = hex.slice(hex.startsWith('#') ? 1 : 0).length === 3 ? extendHex(hex) : hex; return `rgb(${parseInt(extendedHex.slice(1), 16) >> 16}, ${(parseInt(extendedHex.slice(1), 16) & 0x00ff00) >> 8}, ${parseInt(extendedHex.slice(1), 16) & 0x0000ff})`; } // hexToRgb('#27ae60') -> 'rgb(39, 174, 96)' // hexToRgb('#acd') -> 'rgb(170, 204, 221)'
isArray
检查给定参数是否为数组。 使用
Array.isArray()
检查某个值是否属于数组。
const isArray = val => !!val && Array.isArray(val); // isArray(null) -> false // isArray([1]) -> true
isBoolean
检查给定的参数是否为本机布尔元素。 使用
typeof
检查某个值是否被归类为布尔基元。
const isBoolean = val => typeof val === 'boolean'; // isBoolean(null) -> false // isBoolean(false) -> true
isFunction
检查给定参数是否为函数。 使用
typeof
检查某个值是否被归类为函数基元。
const isFunction = val => val && typeof val === 'function'; // isFunction('x') -> false // isFunction(x => x) -> true
isNumber
检查给定参数是否为数字。 使用
typeof
检查某个值是否归类为数字基元。
const isNumber = val => typeof val === 'number'; // isNumber('1') -> false // isNumber(1) -> true
isString
检查给定参数是否为字符串。 使用
typeof
检查某个值是否属于字符串基元。
const isString = val => typeof val === 'string'; // isString(10) -> false // isString('10') -> true
isSymbol
检查给定参数是否为符号。 使用
typeof
检查某个值是否被归类为符号基元。
const isSymbol = val => typeof val === 'symbol'; // isSymbol('x') -> false // isSymbol(Symbol('x')) -> true
RGBToHex
将 RGB 组件的值转换为 colorcode。 使用按位左移位运算符 (
<<
) 和
toString(16)
将给定的 RGB 参数转换为十六进制字符串, 然后
padStart(6,'0')
以获取6位十六进制值。
const RGBToHex = (r, g, b) => ((r << 16) + (g << 8) + b).toString(16).padStart(6, '0'); // RGBToHex(255, 165, 1) -> 'ffa501'
timeTaken
测量执行函数所用的时间。 使用
console.time()
和
console.timeEnd()
来测量开始和结束时间之间的差异, 以确定回调执行所用的时间。
const timeTaken = callback => { console.time('timeTaken'); const r = callback(); console.timeEnd('timeTaken'); return r; }; // timeTaken(() => Math.pow(2, 10)) -> 1024 // (logged): timeTaken: 0.02099609375ms
toOrdinalSuffix
将序号后缀添加到数字。 使用模数运算符 (
%
) 查找单个和十位数字的值。查找匹配的序号模式数字。如果在青少年模式中发现数字, 请使用青少年序号。
const toOrdinalSuffix = num => { const int = parseInt(num), digits = [(int % 10), (int % 100)], ordinals = ['st', 'nd', 'rd', 'th'], oPattern = [1, 2, 3, 4], tPattern = [11, 12, 13, 14, 15, 16, 17, 18, 19]; return oPattern.includes(digits[0]) && !tPattern.includes(digits[1]) ? int + ordinals[digits[0] - 1] : int + ordinals[3]; }; // toOrdinalSuffix("123") -> "123rd"
UUIDGenerator
生成 UUID。 使用
crypto
API 生成 UUID, 符合RFC4122版本4。
const UUIDGenerator = () => ([1e7] + -1e3 + -4e3 + -8e3 + -1e11).replace(/[018]/g, c => (c ^ crypto.getRandomValues(new Uint8Array(1))[0] & 15 >> c / 4).toString(16) ); // UUIDGenerator() -> '7982fcfe-5721-4632-bede-6000885be57d'
validateEmail
如果给定的字符串是有效的电子邮件, 则返回
true
, 否则为
false
。 使用正则表达式检查电子邮件是否有效。如果电子邮件有效, 则返回 true, 如果没有, 则
true
false
。
const validateEmail = str => /^(([^<>()[]\.,;:s@"]+(.[^<>()[]\.,;:s@"]+)*)|(".+"))@(([[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}])|(([a-zA-Z-0-9]+.)+[a-zA-Z]{2,}))$/.test(str); // validateEmail(mymail@gmail.com) -> true
validateNumber
如果给定值为数字, 则返回
true
, 否则为
false
。 将
!isNaN
与
parseFloat()
结合使用, 以检查参数是否为数字。使用
isFinite()
检查数字是否是有限的。使用
Number()
检查强制是否保持。
const validateNumber = n => !isNaN(parseFloat(n)) && isFinite(n) && Number(n) == n; // validateNumber('10') -> true
Credits
Icons made by Smashicons from www.flaticon.com is licensed by CC 3.0 BY. 再次声明:有需要转载请保留头部信息,有问题可以联系我的微信,caibaojian89